Made in USA

This kit with 3/8 NPT and 1/2 NPT o-ring adapters works well for installations on LS engines. Although this is a universal heater hose kit, we encourage you to take advantage of our revolutionary new fitting exchange program. Every hose kit includes an exchange form and a pre-addressed exchange envelope. Simply fill out the form, return any of the fittings in the kit and we will exchange them for you. You provide the postage to us and we will provide the postage back to you. With this program, you can start with a universal kit and make it specific to your installation.

Kit includes:

12' Pure Stealth Black Nylon Braided E-Z Clip #10 Hose

3 Pure Stealth Black #10 90 degree E-Z Clip Hose Ends

1 Pure Stealth Black #10 45 Degree E-Z Clip Hose End

1 Pure Stealth Black 3/8 NPT x #10 O o-ring adapter

1 Pure Stealth Black 1/2 NPT x #10 O o-ring adapter

2 Grommets

1 Tube O-Ring Oil

1 Fitting Exchange Envelope

Pure Stealth E-Z Clip Fittings are coated with our proprietary ceramic coating. The coating is extremely durable but it can be scratched. Care should be taken during the assembly and installation process to prevent damaging the coating.

Measure and cut your Pure Stealth Nylon Braided E-Z Clip or standard E-Z Clip hose to the correct length. Slide the supplied heat shrink tube onto the hose along with both of the supplied E-Z Clip clips. Apply a drop of the supplied o-ring oil onto the two viton o-rings on the fitting nipple. Slide the Pure Stealth E-Z Clip fitting into the hose until it bottoms out against the raised collar. Snap the supplied cage onto the fitting as pictured. Slide the two clips over the cage so that they are located in the recessed depressions on the cage. This insures that the clips are aligned directly over the viton o-rings.

Use E-Z Clip pliers to squeeze the clips together until you hear them click. When using our Pure Stealth Braided Nylon E-Z Clip Hose, it may be necessary to use a vise to apply adequate pressure on the pliers.

Slide the heat shrink tube over the cage and clips and use a heat gun or pen torch to shrink it over the assembly.

We suggest orienting the two bumps on the clips away from the line of sight. Lubricate the o-ring and threads on the fitting with the supplied PAG oil and it is ready for installation.

If you are using an LS engine with the stock water pump, simply pull the steel heater hose barbs out of your water pump, drill and tap the holes. The smaller port will be the pressure port and it should be tapped to 3/8 NPT. The larger port will be the return port and it should be tapped to 1/2 NPT. Install X15000 in the pressure port and X15010 in the return port.

We have the unique ability to incorporate various colors and braiding patterns into all of our Pure Stealth line of hose kits to create a comprehensive visual statement under the hood of your hot rod, muscle car or classic truck. Give us a call today to visit with one of our sales associates about taking your project to the next level. 928-505-8355

Color and braiding options shown pictured above from left to right are: Pure Stealth Black, Triple Teak, Double Teak, Triple Yellow, Double Yellow, Triple Gold. Double Gold, Triple Orange, Double Orange, Triple Bronze, Double Bronze. Triple Green, Double Green, Triple Blue, Double Blue, Triple Red and Double Red.

Made in USA